Lawncare and Landscape We are in the process of updating our website. Please call (434) 385-5150 for more information about our lawn care and landscape equipment available for rent.

18″ Rear Tine Tiller
18″ Rear Tine Tiller

The 712 is equipped to handle garden plots and smaller garden applications, but is limited in power for
larger activities. Anti-vibe handlebars instantly adjust both vertically and side-to-side.

Weight: 280 lbs
Working Speeds: 1 forward, 1 reverse
Working Wheel Speeds: 0.6 and 1.4 MPH
Standard Wheel Size: 4” x 8”
Transmission: All Gear Drive
Axle Configuration: Straight Axle
Clutch Type: Double Cone, Spring-Loaded

4HR-$80
DAY-$95
24HR-$115

THIS ITEM REQUIRES A PICK-UP TRUCK OR TRAILER FOR TRANSPORTATION
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
20″ Rear Tine Tiller
20″ Rear Tine Tiller

This tiller has the power to manage you toughest garden jobs. One of BCS’s most popular models, the Harvester 712 is an excellent choice for those property owners who
want a combination of performance and versatility. Built much like the Harvester 718, the 722 has more
power with a Honda GX240 engine, one forward and reverse speeds

Easy-to-engage, shuttle-type reverse
Anti-vibe handlebars that instantly adjust both vertically and side-to-side

Engine: Honda GX240
Weight: 305 pounds
Working Speeds: 1 forward, 1 reverse
Working Wheel Speeds: 0.6 and 1.4 MPH
Standard Wheel Size: 4” x 10”
Transmission: All Gear Drive
Axle Configuration: Straight Axle
Clutch Type: Double Cone, Spring-Loaded

4HR-$90
DAY-$105
24HR-$135

THIS ITEM REQUIRES A PICK-UP TRUCK OR TRAILER FOR TRANSPORTATION
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
24 brush cutter
24 Inch Brush Cutter

MIN-$60
DAY-$75
24HR-$95

Billy Goat Outback 24″Brush Cutter
Nearly Indestructible

Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier

The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut

SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
24″ Electric Hedge Trimmer
24″ Electric Hedge Trimmer

Little Wonder Electric Hedge Trimmer

24″ Double Sided

Product Type Equipment
Equipment Class Commercial
Equipment Class Residential
Equipment Category Hedge Trimmers
Power Source Electric

4HR-$20
DAY-$25
24HR-$30

FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
26 brush cutter
26 Inch Brush Cutter

4HR-$70
DAY-$90
24HR-$105

Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2′ wide and brush 6′ tall – all at a rate of just under an acre of brush per hour.

The BC26 has a 26″ wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes

Ergonomically-angled plow-style handles with padded grips offer comfort and protection. Never take your hands off the machine to shift gears with conveniently located controls.

Step up to the Billy Goat Outback BC26 and dramatically improve your productivity.

SPECS
Engine Brand Honda
Displacement (cc) 390
Start Pull
Cut Width (in) 26
Cut Height (in) 3.75
Weight (lbs) 317
Length (in) 83
Width (in) 31

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
36 LAWN ROLLER
36 Inch Lawn Roller

4HR-$20
DAY-$25
24HR-$30

18″ x 36″ steel lawn roller made from sturdy 11-gauge steel. Features a 1″ full-length axle running through the entire drum. Rolled edges on each drum to prevent turf damage, grease fittings on removable bearings, spring-loaded scraper bar to keep drum clean, 2″ fill opening with expansion plug and a convertible handle for pushing or towing.

138 lbs. empty
572 lbs. water-filled.

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
5′ Brush Cutter
5′ Brush Cutter

Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property

Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly

4HR-$99
DAY-$99
24HR-$120

THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
55lb Spreader
55lb Spreader

Product description
Walk behind spreader with Poly hopper (55lb. Capacity)

Product information
Package Dimensions 20.9 x 17.4 x 13 inches
Item Weight 19.4 pounds
Shipping Weight 19.4 pounds
Manufacturer Spyker

4HR-$10
DAY-$10
24HR-$15

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
7HP Walk Behind Blower
7HP Walk Behind Blower

4HR-$35
DAY-$40
24HR-$45

Moves Air At 185 MPH & 1850 CFM
Clears away leaves & yard waste in no time
Much faster & easier on your back than raking
15 Inch Diameter Poly Impeller
Powerful & light weight; balanced for smooth operation
Adjustable Deflector With Kickable Handle
Divert air up, down, forward or sideways without bending over
Sturdy 3-Wheel Frame
Easy to manuever on any terrain
Adjustable loop handle with cushioned anti-vibration grip
9-Inch Pneumatic Front-Locking Swivel Wheel
2 height adjustments put the air right where it’s needed
12-inch pneumatic rear wheels provide stability & traction
Axle gussets for extra stability

Specifications
Engine
Engine Brand Briggs & Stratton
Starting System Recoil Start
Engine Cycle 4-Cycle
CC 250 CCs
Impeller
Impeller Material Composite
Impeller Size 15 Inches
Blower
Volume of Air 1850 CFM
Air Speed 185 mph
Wheels
Front Tire Size 9 Inch
Rear Tire Size 12 Inch
Tire Type Pneumatic Wheels
Overview
Weight 135 Pounds

FOR ADDITIONAL RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
9hp blower
9HP Walk Behind Blower

4HR-$55
DAY-$70
24HR-$85

Optimax

Advanced impeller and aerodynamic design produce the highest airflow in the industry
Unique split-stream air deflector moves piles of leaves farther and faster; without blow-back!

Large, square discharge chute is low to the ground for better blowing power
Scrolled housing ensures consistent, constant airflow even if partially blocked by leaves
Continuously welded all-steel impeller and housing for strength and durability you can rely on season after season
Remote discharge chute control on the handle at your fingertips
Ergonomic handle design; height adjustable with anti-vibration grip
Transport bracket for convenient tie-down during transport.
Convenient lift handle makes lifting the blower on and off the truck easier.
Optional Swivel Wheel Kit for 360° turning

Engine Honda GX270 Subaru EX27
Displacement 270cc 265cc
Fuel Capacity 1.4 Gal. 1.6 Gal.
Air Cleaner type Dual Element Dual Element
Low Oil Sensor Standard Standard
Impeller (diameter, type ) 17″, 7 blade steel, reverse angle 17″, 7 blade steel, reverse angle
Impeller depth 2.75″ 2.75″
Discharge Chute Area 25.8 sq ” 25.8 sq ”
Air Volume 2260 cfm 2260 cfm
Air Speed 153 mph 143 mph 143 mph
Integrated Front Discharge Yes Yes
Throttle Control Remote Remote
Air Flow Control Remote Remote
Dimensions
(Height, Width, Length) 43″ x 28″ x 56″ 43″ x 28″ x 58″
Tires, Front 10″ pneumatic front tire w/ tube
Tires, Rear 12″ pneumatic rear tires w/ tube
Handle Ergonomic 2-position adjustable; anti-vibration grip
Transport Bracket Yes Yes
Lift Handle Yes Yes
Housing Continuously-welded steel; 1 piece engine deck
Weight 142 lbs 140 lbs

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
Backhoe Attachment
Backhoe Attachment

The BH77 Backhoe is performance-matched with the B50 tractors to deliver more power and greater
digging capacity. Additionally, the BH77 backhoe features a curved boom, protected hoses.

Backhoe Specifications
Transport height in. (mm) 80.7 (2051)
Stabilizer spread – transport in. (mm) 51.8 (1315)
Ground clearance in. (mm) 12.6 (319)
Digging depth 2ft flat bottom in. (mm) 91.8 (2331)
Operating height fully raised in. (mm) 119.2 (3029)
BH77
Loading height (length of dipper cyl. = 715mm) in. (mm) 66.7 (1693)
Loading reach (length of dipper cyl. = 715mm) in. (mm) 50.8 (1290)
Reach from swing pivot in. (mm) 124.6 (3165)
Swing pivot to rear axle center line in. (mm) 38.4 (976)
Angle of departure per SAE J1234 deg. 17.3
Swing arc deg. 180

4HR-$75
DAY-$75
24HR-$100

THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Bed Edger
Bed Edger

4HR-$60
DAY-$75
24HR-$95

Model F791H BedEdger

The Model F791H provides the maneuverability and power you’ve been needing. Features Honda Engines and steerable wheels.

Engine Honda Commercial
Weight 170 lbs/77Kg
Wheels Steel with Pneumatic Tires
Points Tungsten Carbide
Drive Double Belt and Pulley System
Rate Bed Edging: 10 to 30 ft. Per Min
Depth 2 to 4 Inches*
Width 1/2 to 9 Inches*

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
BG AERATOR
Billy Goat Aerator

4HR-$60
DAY-$80
24HR-$99

This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged.

Additionally, the AE401 also eliminates bulky steel weights, in favor of a simple to use water weight positioned directly over the tines for better aeration depth (full tank = 50 lbs.). The unit features the industry’s softest tine engagement and exclusive Lift N Lock disengagement for best in class comfort and productivity. After use and during transport, tilt up serviceability, removable tine stars, and Fold-n-Go handles, and easy adjust drive chains make service and transport convenient and simple.

Engine Honda
Displacement (cc) 118
Coring Tines (in) .625 x 3.5
Tines 24
Tine Pattern (in) 4.5 x 7
Weight (lbs) 242
Length (in) 57
Width (in) 29
Height (in) 52.5
Wheel Type Semi-pneumatic

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
BlueBird Power Rake Dethatcher
BlueBird Power Rake Dethatcher with Bagger

MIN-$50
DAY-$60
24HR-$70

The PR22 operates as a power rake, seeder, or power rake with rear catcher bag to collect thatch. The modular design provides the option of changing reels quickly and easily. Units are available with or without a reel assembly. Combining the base platform with any reel and/or kit (seeder or bagger), offers versatility for every
application. The PR22 with a bagger makes dethatching and clean-up simple and efficient. The 5 bushel bag is quickly removed and emptied.

Working width: 22 inch
Standard blade type: Flail blade
Engine manufacturer: Honda
Power: 5.5 HP
Product size, LxWxH 26Ÿ x 28 x 40
Weight 144 lbs

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Towable Aerator
BlueBird Tow Behind Aerator

4HR-$45
DAY-$55
24HR-$65

TA12 Towable Aerator

The TA12 has an aerating width of 48IN to give you the extra capability to handle just about any situation.
Two independent tine rotors with 40 interchangeable closed spoon 1/2IN tines provide superior maneuverability around corners and tight areas. Six optional weight containers ensure optimal soil penetration
Tip wheels allow the TA10 to easily pass through narrow openings.

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
Cable Layer
Cable Layer

4HR-$60
DAY-$75
24HR-$95

The Model R450H provides the maneuverability and power you’ve been needing. Features GX160 5.5 HP Honda engine. Up to 65 feet per minute, depending on soil conditions
Will produce a savings of 50% to 80% on time and labor
It digs a trench from 2”-4” deep
Tricycle running gear
Very maneuverable; easy to load and unload
Rubber hood controls excavated dirt for less clean-up time

Engine GX160 5.5 HP Honda
Weight 90 Pounds
Wheels Steel w/ 9×3.50-4 pneumatic tires
Points Tungsten Carbide
Drive Double Belt Drive System w/ Hand-actuated clutching
Rate Bed Edging: 10 to 30 ft. Per Min
Trenching: 7 to 30 ft. Per Min
Depth 2”-4” deep
Overall Width 26 Inches
Overall Height 52 Inches (Operating Configuration)
42 Inches (Handle Folded)

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
Power Rake and Dethatch
Classen Self-Propelled Turf Rake and Dethatcher

4HR-$55
DAY-$65
24HR-$80

Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.

• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires

Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Classen Split Drive Aerator
Classen Split Drive Aerator

MIN-$60
DAY-$80
24HR-$99

The only aerator with power steering.
• Simple controls allow you to aerate straight, follow curves and turn left or right
• Combination throttle and belt tightener for a smooth start every time
• Side bumpers prevent catching on obstacles and tire scrapes ensure consistent tine depth
• Removable weights and fillable water drum for greater tine penetration in tough soil
•Effortless end-of-row turning, aerate in tight circular areas and easily maneuver around trees, hydrants and other above ground obstacles.
• Combination throttle and belt tightener for a smooth start every time
• Protective chain guards help keep grass, leaves and cores out of chains and sprockets

Dry Weight 370 lbs.
Aerating Width 24.375″
Coverage 29,000 sq. ft. per hour
Core Depth Up to 2.75″
Tines 36 36
Hole Pattern 4.06″ x 7″ 4.06″ x 7″
Weight Bar Removable 50 lb. weight bar
Drum 9.5 gal. front poly drum
Engine Honda® GX120

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
CLASSEN TOW AERATOR
Classen Tow Behind Aerator

4HR-$55
DAY-$65
24HR-$80

These heavy–duty core aerators are easily used with the average 15 hp riding mower or tractor. Whether your
aeration job is a lawn, sports field, or municipal facility, there’s a Classen tow–behind core aerator that’s just
right for you.

Lift Manual
Dimensions 34″ H x 56″ W x 62″ L
Aerating Width 42″
No. of Tines 48
Hitch Type Tow/ 3 point
Load Capacity (pounds) 780
Weight (pounds) 320

• Constructed of 1-1/2″ x 1-1/2″ solid steel (not square tubing)
• Weight tray for optional added weight
• Tine shafts operate independently for greater turning ease
• Built 1.5″ x 1.5″ solid steel (not square tubing)
• Aerate up to 4″ deep
• Hole pattern 5.25? x 7?
• Wheels rotate 90 degrees
• Available in 42″ and 52″ widths
• Flexible hitch system
• Can be mounted with 3-point mount or hitch mount
• 48RT can be pulled by a riding mower

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Extended Hedge Trimmer
Extended Hedge Trimmer

Description
Every hedge is unique – which is quite a challenge when you’re trying to trim them. Whether tall or
short, skinny or wide, hedges everywhere can’t escape the STIHL HL 100 K (135º) extended reach
hedge trimmer. With its 42” long shaft and adjustable cutting blade angles, this professional hedge
trimmer helps turn those unruly hedges into uniform walls of green. And speaking of green, the
HL 100 K features a low-emission engine for environmentally responsible hedge trimming. For power
and versatility, this hedge trimmer has it all.

FEATURES:
DISPLACEMENT 31.4 cc (1.9 cu. in.)
ENGINE POWER 1.05 kW (1.4 bhp)
WEIGHT 6.4 kg (14.8 lbs.)
BLADE LENGTH 500 mm (20 in.)
SHAFT LENGTH 1070 mm (42 in.)
FUEL CAPACITY 530 cc (18.0 oz.)

4HR-$40
DAY-$50
24HR-$65

1 GAL OF MIXED FUEL IS INCLUDED WITH RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Hedge Trimmer HS45
Hedge Trimmer HS45

HS 45
This hedge trimmer is lightweight and easy to use, ideal for trimming around the home.

Give your hedges a clean trim every time with the STIHL HS 45 hedge trimmer. Available with an 18”
double-sided reciprocating blade, this trimmer is powered by a dependable STIHL engine, so you
have the power you need to cut through shrubbery with ease. And with its large, comfortable handles,
move from hedge to hedge and create clean, even cuts with precision.
Anti-Vibration System
STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The
STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working
experience.
HS – Double-Sided BladesZoomDouble-Sided Blades
The dual-ground blade system provides a clean cut and is ideal for cutting through stronger, thicker
branches.

DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.75 kW (1.01 bhp)
FUEL CAPACITY 230 cc (7.8 oz.)
BLADE LENGTH 18″
STROKES PER MINUTE 3,700
POWER SOURCE Gas
WEIGHT* With 18″ blade: 4.7 kg (10.4 lbs.)

4HR-$25
DAY-$30
24HR-$40

1 GAL MIXED FUEL INCLUDED IN RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Hedge Trimmer HS81R
Hedge Trimmer HS81R

HS81R hedge trimmer has 24″ Double-Sided blades for faster cutting, swivel handle for easier
maneuverability, Low vibration and light weight. Perfect for Rejuvenation and Heavy Pruning.
High torque gearing of 3100 strokes per minute

22.7cc
.94 BHP
11.2lbs

4HR-$30
DAY-$40
24HR-$50

1 GAL MIXED FUEL INCLUDED WITH RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Honda Mower
Honda Mower

MIN-$25
DAY-$35
24HR-$45

Basic side discharge grass clipping removal with optional mulching blades
Commercial-grade Honda GCV160 4-Stroke engine delivers plenty of power and dependability

Six adjustable mowing heights from 1 in. to 3-1/2 in. for various grass lengths
Rugged 21 in. heavy-duty steel deck offers enhanced durability and deck longevity
Large 8 in. wheels with rear ball bearings for increased durability and maneuverability

Product Dimensions 24 x 24 x 18 inches
Item Weight 63 pounds

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Lawn Solutions Slit Seeder
Lawn Solutions Slit Seeder

MIN-$80
DAY-$99
24HR-$120

Durable, lightweight and easy to use, Operators can make a tight turn — even on hills. The variable-speed
drive system operates in forward and reverse. All models are constructed of solid 11-gauge steel for
maximum durability. Blades are made of high-carbon, heat-treated spring steel that can handle abuse
without chipping or bending. A large 40 lb. capacity seed mixer regulates seed delivery based on ground
speed for even application.

Specifications
Blade Type 10 Verticutting Blades
Engine Subaru® EX27
Fuel Capacity 1.6 gallons
Ground Speed 3 mph (4.8 km/h) (forward); 2.2 mph (3.5 km/h) (reverse) Height 28″ (handle folded) 45″ (handle up)
Hopper Capacity 40 lbs. (18 kg)
Length 27″ (69 cm) (handle folded) 52″ (132 cm) (handle up)
Seeding Depth Up to 1″ (2.5 cm)
Weight 260 lbs (118 kg)
Width 30″ (76 cm)
Working Width 20″ (51 cm)
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Lawn Solutions Slit-Seeder Wheel Driven
Lawn Solutions Slit-Seeder Wheel Driven

LS-20 lawn seeder is capable of delivering maximum germination for superior lawn overseeding results. The
optimized 1 1/2-inch blade spacing and micro-screw depth adjustment offers quick, accurate blade
adjustments for optimal seed-to-soil contact in virtually any lawn seeding conditions.

Large pneumatic tires allow the LS-20 to roll easily over any terrain and a convenient seed window allows
quick reference of seed levels. The poly seedbox is durable, easy to clean and contains quick reference seed
charts. The essential controls are easy to reach and operate. The LS-20 overseeder has a heavy duty and
durable body with folding handles for easy loading and transporting. LS-20 makes seeding easy.

Seeds over 30,000 square feet per hour. ( Depending on conditions)
Cutting blades are 1 1/2-inches apart for close seed spacing.
All controls are located on the handle—blade clutch, lift bail and positive seed flow control are within easy
reach.
Large pneumatic tires make the LS-20 usable on almost all turf conditions.
The micro-screw depth adjustment allows accurate setting of the cutter blades for best seed/soil contact.
Folding handles for easy transport and storage.
Replace the blades without removing the cutting head—remove two bolts to replace a damaged blade in
minutes.
Ergonomic clutch bail design for operator comfort.

Drive System: Spring-loaded belt
Clutch Control: Handle-mounted
Seed Box Rotor: Independent ground-driver
Seed Box: Reinforced molded plastic
Capacity: Approximately 30 pounds
Seed-Rate Adjustment: Mechanical, cam-action adjustable to handle different seeds
Blades: 28 individually replaceable HD blades
Blade Spacing: 1.5″
Seeding Width: 20″
Seeding Depth: Adjustable to 1.5″ above the ground to 1.5″ deep
Wheels: 10″ diameter pneumatic
Weight: 200 lbs.
Width: 31-1/2″
Height: 43″
Length: 49″
Seed Types: Ryegrass, bluegrass, fescue, and others

4HR-$65
DAY-$75
24HR-$80

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
LS AERATOR
Lawn Solutions Walk Behind Aerator

MIN-$60
DAY-$80
24HR-$99

This model features a unique hydraulic drive system that provides excellent maneuverability and ease of use — no need to raise the tines to turn the machine. A wide unibody frame with 10-gauge steel construction and outboard drive wheels give this machine a low center of gravity for excellent side hill stability. Plus, it’s compact enough to get into the tightest areas and can aerate in reverse to back out. Handles fold to make transport and storage a snap. Self-cleaning tines are capable of creating plugs up to 4″ deep, depending on ground conditions.

Specifications
Aerating Depth Up to 3″ Aerating
Width 21″
Engine HONDA
Fuel Capacity 1 gallon
Ground Speed 4 mph (forward)/2.2 mph (reverse)
Height 38″ (handle folded) 46″ (handle up)
Length 48″ (handle folded) 50″ (handle up)
Weight 320 lbs. (with 1-27 lb. weight) 285 lbs. (w/out weights)
Width 31.5″
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Lawn Vaccum
Lawn Vaccum

Clear up to 17,500 sq. ft. per hour
Designed for Rugged Use
Large 29″ nozzle width improves suction and debris flow
Collect pinecones, leaves and grass clippings
16-3/4″, 5-Blade Steel Impeller
Reverse-angled impeller results in superior suction and airflow
Best reduction ratio – reduces debris better than the competition
Unique Scrolled Housing Design
12-gauge steel construction
Funnels airflow and material down into the bag
Creates far less dust around the operator
Large 8-Bushel (90 Pound) Bag Capacity
Wider opening for easier dumping
Attaches and detaches quickly and easily
Nozzle Height Adjusts Automatically
No need to stop the engine and change height settings
Helps Avoid ‘scalping’ and ‘digging in’ on rough terrain
Large Pneumatic Wheels
10″ front wheels and 12″ rear wheels

Made in USA
Weight 184 Pounds
Product Length 62.0 Inches
Product Width 29.0 Inches
Product Height 40.0 Inches

4HR-$45
DAY-$65
24HR-$75

FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Mid-Tine Tiller
Mid-Tine Tiller

International Mid-Tine® Tillers
The Merry Tiller® Mid-Tine® International Tiller is the best. There is no soil the International cannot handle.
With more torque than the Suburban, the International powers through the soil quickly and efficiently,
creating deep loamey earth great for your gardening needs. Whether it is expanding an existing garden,
creating a new garden, or tilling a mature garden, the International is the perfect tiller.

International Action The International features a triple gear reduction transmission creating foot pounds of
torque. The double V-belt drive systems provides a better power transfer to the tines.

Engine Honda GX160 Commercial
Engine CC’s 163
Tines Slasher
Tilling Depth 12″
Tilling Width 37″
Transmission Roller chain and sprocket
Frame Structural steel
Drag Bar Adjustable
Hitch Cast iron
Start Manual
Weight (lbs.) 170

4HR-$40
DAY-$60
24HR-$75

FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Mini-Tiller MM55
Mini-Tiller MM55

Multi-Function Control Handle
Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the
operator’s hand never has to leave the handle.
Compact Design
The folding handles and front hand grip make the YARD BOSS® compact and easy to transport and store.

MM 55 STIHL YARD BOSS® Specifications – Occasional Use
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
FUEL CAPACITY 330 cc (11.2 oz.)
TINE SPEED 200 rpm
CULTIVATING WIDTH 8.5″
PICK TINE DIAMETER 9.1″
POWER SOURCE MIXED Gas
WEIGHT* 9.5 kg (20.9 lbs.)

4HR-$30
DAY-$40
24HR-$50

1 GAL OF MIXED FUEL IS INCLUDED WITH THIS RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Plugr Aerator
Plugr Aerator

4HR-$45
DAY-$65
24HR-$70

This compact 18″ aerator is ideal for smaller property aeration or rentals and features reciprocating cam Tines that propel the unit forward and drive cores up to 2.75″ deep. The unit can aerate up to 22,000 sq. ft. per hour, is simple to operate for homeowners, easy to steer without lifting and requires no add-on weights.

Engine Honda
Displacement (cc) 118
Tines 4
Weight (lbs) 240
Core Depth (in) Up to 2.75
Core Spacing (in) 3.63 x 6
Length (in) 57
Width (in) 24
Height (in) 40
Wheels (in) 12
Wheel Type Semi-pneumatic

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Pole Pruner HT131
Pole Pruner HT131

Reach for high branches with ease thanks to the HT 133 Pole Pruner. Its gearbox reduces weight at the
cutting attachment compared to the previous model to provide easier handling and less fatigue. A
powerful fuel-efficient, low-emission engine makes the HT 133 the ultimate choice for heavy tree
maintenance tasks. Plus, with its squared shaft, users can prune high branches with ease and precision
while the large fuel tank allows for 30% longer run times than the previous model. The HT 133 is
packed with all the features of the HT 103, but with 35% more power for tough pruning and trimming
jobs.

Telescoping Pole
With an adjustable shaft, telescoping pole pruners can cut branches up to 16 feet above ground
STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The
STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working
experience. HT – Multi-Function Control HandleZoomMulti-Function Control Handle Having easy
access to all of the controls on one comfortable handle helps makes it easier to complete tasks so the
operator’s hand never has to leave the handle

DISPLACEMENT 36.3 cc (2.2 cu. in.)
ENGINE POWER 1.4 kW (1.9 bhp)
OVERALL LENGTH 7’6″ to 11’6″
FUEL CAPACITY 710 cc (24 oz.)
CHAIN OIL CAPACITY 220 cc (7.4 oz.)
OILOMATIC® Chain/Guide Bar Size 1/4″ STIHL PICCO™ 71 PM3 / 35.5 cm (14″)
POWER SOURCE Gas
WEIGHT* 7.2 kg (15.9 lbs.) with cutting attachment

4HR-$55
DAY-$65
24HR-$75

1 GAL MIXED FUEL INCLUDED WITH RENTAL
SAFTEY KIT IS FURNISHED FOR OUR CUSTOMERS PROTECTION
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Poly Push Lawn Roller
Poly Push Lawn Roller

4HR-$15
DAY-$20
24HR-$25

18 in. x 24 in. 270 lb. Combination Push Poly Lawn Roller
Easy to push
Holds up to 270 lbs. of sand or water
Rugged steel design with rounded ends to prevent damage to lawn

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Poulan Mower
Poulan Push Walk Behind Mower

4HR-$25
DAY-$35
24HR-$45

This push walk behind mower is perfect for residential lawn maintenance and is powered by a reliable Briggs & Stratton 500 Series engine. A 21 in. stamped steel cutting deck is well-suited for most suburban yards. A 11 in. high rear wheel provides good maneuverability and works best on flat, hilly and uneven terrain.
Side discharge or mulching push mower (this unit will not accommodate a bagger).

5 positions height adjuster
7 in. front wheels with 11 in. rear wheels for extra maneuverability
2.7 HP at max RPM
21 in. Walk-Behind Gas Push Mower
Powered by a Reliable Briggs & Stratton 500 Series Engine
12-in. High Rear Easy-Rolling Wheels for Better Maneuverability
2-in-1: Mulch and Side Discharge

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Sidewalk Edger
Sidewalk Edger

4HR-$35
DAY-$40
24HR-$50

The Pro Edger is user–friendly with fingertip controls and a ratchet–arm height adjustment system for fatigue–free operation and control. The Little Wonder Pro Edger is built for heavy, daily usage. Cut create crisp, distinct edges faster, and with less effort.

Available with Honda® GX120 engine
Edges up to 90 feet per minute. Get the job done quickly and more efficiently!
Largest available cast iron cutter head on the market
Dual belt drive provides extra power to the blade and reduces slippage during application.
10″ steel blade is sharpened on all four sides giving you the ability to flip the blade over and extends time between sharpening
Adjust cutting depth up to 4″
Blade shield keeps debris off the belts
Convenient controls adjust depth, belt tension, and blade engagement all from the operator’s position
Anti-vibration grip for user comfort
Four wheel design provides extra stability and eliminates the need for a curb wheel.
All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier
maneuverability

Engine Honda GX120
Handles Anti-Vibration Grips
Displacement 118cc
Cast Iron Cutter Head Fixed
Drive Belt Dual Belts Dual Belts
Edging Depth Up to 4 inches
Steel Hubbed 8″ Wheels 4
Weight (pounds) 69
Fuel Capacity 3 quart

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Slit Seeder Billy Goat
Slit Seeder Billy Goat

Billy Goat’s self-propelled overseeder reduces fatigue associated with pushing and features intuitive forward
and reverse operator controls. New to the unit is a blade design that reduces thatch and improves blade life
due to its sharpened leading edge and attack angle combined with a new foot actuated height adjust that
raises and lowers the reel effortlessly, providing more blade depth. The unit is 22” (56 cm) wide with an
exclusive 11-blade slicing reel that floats along contours of yards increasing seed to soil contact and
improving germination rates. The unit comes standard with a 30 lb (13,6 kg). seed box that is generously
elevated above the turf to eliminate any clogging that may occur from moisture. Billy Goat’s exclusive Auto
Drop™ system automatically starts and stops seed drop with bale engagement and disengagement
conserving seed and preventing end-of-run seed piling. Infinite depth adjustment of the slicer blades
promotes longer blade life vs. presets and seed settings are found on board for operator convenience.
When it’s time to rejuvenate your yard, Clean Up with Billy Goat!

Self-Propelled Hydrostatic Drive
With intuitive forward & reverse drive controls eliminate pushing to reduce fatigue. Simple auto release
switch for transport in off position.
Auto Drop™ System
Automatically starts and stops seed drop with reel engagement & disengagement, conserving valuable seed.
Elevated Seed Box
Prevents moisture from clogging the seed and drop provides excellent visibility. Axle driven seed agitator
eliminates belts & tire-on-tire systems.

Engine Brand 270cc Honda® GX270
Depth Adjustment 0.125″ to 0.5″ (0.3 cm to 1.3 cm)
Seeding Width 22″ slicing (56 cm)
Productivity 29,040 sq ft/hr, 0.67 acre/hr
Weight 146.5 kg
Length 58.38″ (148 cm)
Width 30.75″ (78 cm)

4HR-$80
DAY-$99
24HR-$120

FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Sod Cutter Kick Type 12″
Sod Cutter Kick Type 12″

This sod cutter is enjoyed by many professionals; Landscapers, Parks & Recreation Supervisors, Cemetery
Administration, Baseball & Softball Field Maintenance, Rental Centers and Cement Contractors. This cutter
is very popular with the “Do it Yourselfer”; a few uses include cutting in a new garden area or trenching for
Fido’s new invisible fence. They are lightweight, easy to use and need no gas or oil to operate. All that’s
required to operate the cutter is a simple kicking motion on the green cross bar while using the handles to
push and direct the cutter’s path. The total weight of the cutter is only 26 lbs, which makes it easy for
anyone to operate.

4HR-$15
DAY-$20
24HR-$25

FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT

Read more
BG 86
Stihl BG 86 Handheld Blower

MIN-$35
DAY-$45
24HR-$55

For the toughest landscaping challenges, professionals turn to one of the most powerful gasoline-powered handheld blowers, the STIHL BG 86. It features a fuel-efficient, low-emission gasoline-powered engine, and includes both flat and round nozzle attachments for better job versatility. The blower is also one of the most
comfortable to use, with a four-spring anti-vibration system, a soft-grip handle and our ElastoStart shock-absorbing starter.

1 Gallon of mixed fuel is provided with this rental

DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 4.4 kg (9.7 Ibs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** Flat: 74 m/sec. (166 mph)
Round: 63 m/sec. (141 mph)
MAX. AIR VELOCITY** Flat: 85 m/sec. (190 mph)
Round: 69 m/sec. (154 mph)
AIR VOLUME AT NOZZLE** Flat: 620 m3/h (365 cfm)
Round: 755 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
BR600
Stihl BR600 Blower

4HR-$40
DAY-$50
24HR-$60

With its powerful, fuel-efficient engine, the BR 600 sets the standard for professional-grade blowers. It produces one of the highest air volume and velocity of the backpack blowers, yet features a low-emission engine, making it a great choice in both urban and rural areas. No matter where the job takes you, the BR 600
blower is the ideal choice for heavy-duty cleanup.

1 Gallon of mixed fuel is provided with this rental

DISPLACEMENT 64.8 cc (3.95 cu. in.)
ENGINE POWER 2.8 kW (3.8 bhp)
WEIGHT 9.8 kg (21.6 Ibs.)
FUEL CAPACITY 1400 cc (47.3 oz.)
BLOWING FORCE* 32 Newtons
AVG. AIR VELOCITY** 89 m/sec. (199 mph)
MAX. AIR VELOCITY** 106 m/sec. (238 mph)
AIR VOLUME AT NOZZLE** 1150 m3/h (677 cfm)
SOUND PRESSURE RATING** 75 dB(A)

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
BR700
Stihl BR700 Blower

4HR-$40
DAY-$50
24HR-$60

The new STIHL BR 700 steps things up a notch in the STIHL blower range. This high output professional blower is the most powerful model to date. Able to clear piles of wet leaves, and reduce bottom line costs with its fuel efficient engine, it is the ideal tool to get control over tough landscaping tasks and large property maintenance. Professionals will love the adaptive design features, including an adjustable telescopic tube to accommodate users of different heights, and different applications, as well as the control handle that adjusts easily without tools to provide the most comfortable position. For further convenience, this blower comes
with a semi-automatic choke for smooth and easy starts. Designed with an optimal power-to-weight ratio the BR 700 combines power and portability so you can get the job done whenever, wherever.

1 Gallon of mixed fuel is provided with this rental

DISPLACEMENT 64.8 cc (4.0 cu. in.)
ENGINE POWER 2.8 kW (3.8 bhp)
WEIGHT 10.6 kg (23.4 lbs.)
FUEL CAPACITY 1400 cc (47.3 oz.)
BLOWING FORCE* 35 Newtons
AVG. AIR VELOCITY** 74 m/sec. (165 mph)
MAX. AIR VELOCITY** 88 m/sec. (197 mph)
AIR VOLUME AT NOZZLE** 1550 m3/h (912 cfm)
SOUND PRESSURE RATING** 75 dB(A)

FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Read more
FS 560 C-EM
Stihl FS 560 C-EM Clearing Saw

24HR-$125 (THIS IS MIN RATE)

 

The most powerful STIHL clearing saw in its class – the FS 560 C-EM cuts through wild growth, hedges and thickets with a rugged design ideal for heavy landscape and forest cutting. Powered by a low-emission engine that is 12% more fuel-efficient than the previous model, the STIHL FS 560 C-EM clearing saw features the STIHL M-Tronic™ engine management system, which provides optimum engine power at all times and automatically adjusts to changes in elevation, temperature and air filter cleanliness. A large 33.5 oz. translucent fuel tank – 31% larger than the previous model – offers longer run times and less refueling. This clearing saw also comes standard with the Easy2Start™ system, which requires minimal pulling force to start the engine. The 4-point anti-vibration system allows optimal control while reducing fatigue, and an easy-to-adjust, soft-grip bike handle swivels for easy transport and storage.

FS 560 C-EM Specifications –
DISPLACEMENT 57.1 cc (3.48 cu. in.)
ENGINE POWER 2.8 kW (3.75 bhp)
WEIGHT* 10.2 kg (22.5 lbs.)
FUEL CAPACITY 990 cc (33.5 oz.)
POWER SOURCE Gas
*Weight without cutting attachment or deflector.

1 Gallon mixed fuel is included with this rental
Saftey kit is included with rental of this unit

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
SH 86 C-E
Stihl SH 86 C-E Shredder Vac

4HR-$35
DAY-$45
24HR-$55

Like a strong wind with an off switch, the STIHL SH 86 C-E professional shredder vac is a powerful landscaping tool – and it comes standard with the necessary parts to easily convert this shredder vac into a handheld blower. It features the same STIHL Easy2Start™ system as the SH 56 C-E, but delivers higher air volume and velocity for tackling difficult yard waste. The shredder vac/blower also features soft-grip handles and four-spring anti-vibration technology for greater comfort on the job. And as it shreds, the clippings accumulate in a secure, easy-open zippered bag for convenient emptying.

1 Gallon of mixed fuel included with rental

DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 5.6 kg (12.3 lbs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** 63 m/sec. (141 mph)
MAX. AIR VELOCITY** 76 m/sec. (169 mph)
AIR VOLUME AT NOZZLE** 756 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
BAG CAPACITY 1.5 cu. ft. = 1.2 bushel

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Stump Grinder 26HP
Stump Grinder 26HP

The TORO STX-26 Stump Grinder brings simple control and serious power to tree care
maintenance. The STX-26 stump grinder features Toro’s patented Dingo® TX-style control system
that is intuitive and easy to operate. The Intelli-Sweep™ cutter head control feature automatically
slows the sweep speed of the cutting head based on the load on the wheel, so heavy cutting loads
won’t bog down the engine. And, with a powerful Kawasaki® engine, tracks and transport speeds
exceeding 4 mph (6.4 km/h), the STX-26 provides ample power with a light footprint for exactly what
you need to get in position and get to work quickly.

Hydraulically Driven
cutter ead
• 13.5 gpm of hydraulic flow
directly to the cutter head to
maximize performance
• Eliminate labor of tightening or
replacing costly poly-chain belts
or clutches
• Eliminates shock loads to the
engine from belts slipping or
stopping
• No need to replace expensive
cogged pulleys

Hi-Drive Track System
• Low center of gravity increases
stability on side hills or uneven
terrain
• Eliminates tire ruts and flat tires
• Track design allows for zero turn
capability for those difficult to
access stumps
• Forward transport speed in
excess of 4 mph
• 10 gpm of hydraulic flow to each
track to maximize traction performance

User-Friendly Design
• Patented, TX controls are intuitive
and easy to use
• All-hydraulic sweep control valve
facilitates side-to-side feathering
• Offset cutting head results in
excellent visibility, regardless of
stump size
• Powerful Kawasaki®
FX-730V
engine for grinding stumps of all
sizes
• Innovative grinder teeth can be
rotated for added longevity and
are easily replaceable

Engine Kawasaki®
FX-730V 4-cycle gasoline air-cooled engine
Hydraulics 13.5 gpm hydraulic flow to cutter head;
10 gpm of hydraulic flow to each track
Wheel 19″ (48.2 cm) diameter to tooth;
0.75″ (1.9 cm) thick; 16 grinder teeth
Cutter Depth 12.5″ (32 cm) below grade
Cutter Height 33″ (84 cm) above grade
Head Swing 47″ (120 cm) arc x 90° sweep arc
Dimensions 34″ (86 cm) W x 78″ (198 cm) L (transport) x 46″ (117 cm) H
Weight 1200 lbs (544 kg)
Max. Travel Speed 4.2 mph (6.8 km/h) forward; 1.6 mph (2.6 km/h) reverse

4HR-$235
DAY-$235
24HR-$235

THE MINIMUM RATE FOR THIS ITEM IS 24HR
THIS UNIT HAS ITS OWN TRAILER, THAT IT MUST BE TRANSPORTED ON
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Stump Grinder 9HP
Stump Grinder 9HP

The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.

The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.

There is still easy access to the cutter head for quick sharpening or replacement.

The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.

From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.

Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds

Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″

4HR-$75
DAY-$90
24HR-$125

FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Stump Grinder, Compact
Stump Grinder, Compact

FEATURES:
• Powered by reliable, long lasting Honda GX engine
• Oil shutdown sensor
• Direct belt drive
• Cyclone air cleaner
• 1″ diameter bearings
• Unique side discharge frame
• Compact and portable
– Handlebar folds over unit
– Can be hauled in vehicles with large openings
• 3-in-1 tooth system
– Greenteeth 500 Series Teeth
– Features concave “dish” cutting edge that sheers rather than shreds
– Teeth can be rotated in three 120° increments for fresh cutting edge

SPECIFICATIONS:
Engine 196cc Honda GX Engine w/ Cyclone Air Cleaner
Fuel Type Gasoline
Teeth Greenteeth® 500 Series Teeth (4)
Cutter Wheel 10.5″ Dia. x .5″ Thick
Disc RPM 4700 RPM
Drive Noram Centrifugal Clutch
Tires 12.5″, 410-350 x 6″ Adjustable Brake Band
Weight 134 lbs
Dimensions 56″L x 23″W x 45″H
Cutting Capacity 10″ Above Grade, 9″ Below Grade

4HR-$65
DAY-$80
24HR-$115

FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Tow Behind Spike Aerator
Tow Behind Spike Aerator

4HR-$20
DAY-$25
24HR-$30

Tow Spike Aerator
Item weight full- 291lbs

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Weed Eater FS110R
Weed Eater FS110R

With smooth acceleration,the FS110R grass and weed trimmer is fuel efficient and powerful for all
you trimming tasks.

Specifications:
Displacement: 31.4cc(1.9cu.in.)
Engine Power: 1.05KW(1.4BHP)
Weight: 12.1LBS
Fuel Capacity: 18.0 oz
Cutting Swath: 16.5″

4HR-$30
DAY-$40
24HR-$50

1 GAL MIXED FUEL INCLUDED WITH RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Zero-Turn
Zero-Turn Riding Mower

4HR-$125
DAY-$125
24HR-$160

Ariens
Zoom 42 in. 19 HP Kohler V Twin Zero-Turn Riding Mower

Well-suited to cut and maintain small to medium-sized yards
Comfortably cut with the foot lever system and high-back seat
Steel frame and durable tires offer stability while you work

The Ariens Zoom 42 is a compact rider that is full of confidence. Combining comfort, convenience and capabilities, the Ariens Zoom 42 is fully equipped to manicure small to medium-sized yards with ease. An effortless foot lever system and premium high-back seat allow you to cut with convenience and comfort. 19 HP Kohler 6000 series twin-cylinder engine offers powerful performance 12-Gauge, stamped-steel deck with 3 maintenance free spindles is engineered for maximum airflow and exceptional cutting performance 42 in. cutting width mows more grass in fewer passes. Twin EZT hydrostatic transaxles designed to deliver responsive, smooth, effortless control. Foot operated deck lift to adjust the height of cut from 1.5 in. to 4.5 in. 18 in. in tall high back seat for maximum riding comfort. 4-point professional deck hanging system provides a stable ride and consistent cutting performance

Dimensions
Assembled Depth (in.)
64 in
Assembled Height (in.)
43 in
Assembled Width (in.)
54 in
Cutting Width
42 inches
Front Wheel Size (in.)
11
Mower Deck Width
42 in
Rear Wheel Size (in.)
18
Turning Radius (in.)
0

Commercial / Residential Residential
Cutting Options Bag,Mulch,Side-Discharge
Deck Material 12 Gauge Steel
Deck Type Stamped
Drive Type Rear-wheel Drive
Engine Displacement (cc) 660
Engine Make Kohler
Engine Torque (ft.-lb.) 27.7
Features Keyed start,Mulching Lawn Mower,Zero-Turn Capable
Fuel Tank Capacity (gallons) 2
Horsepower (hp) 19 hp
Maximum Cutting Height (in.) 4.5
Maximum Forward Speed (mph) 6
Maximum Reverse Speed (mph) 3
Minimum Cutting Height (in.) 1.5
Mower Size Small
Number of Blades 3
Number of Cylinders V-Twin
Number of Deck Wheels 4
Power Type Gas
Product Weight (lb.) 440 lb
Size of Yard 1/2 – 2 Acres
Start Type Electric
Terrain Type Flat with Obstacles
Transmission Type Hydrostatic

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more