2 Inch 72 GPM Water Pump
This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners. Further, the ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25’ Power Cable with strain relief. Model ST2037F is available that provides a tethered industrial mechanical float switch assembly.
1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
Built-in Overload Protection.
2” (NPT) Female Discharge Port.
Reliable double mechanical oil-filled seals.
Cast iron/steel motor casing serves as heat conductor.
Pumps Liquid Up To 120° F.
25’ of molded power cord w/strain relief
Dewaters Flat Surfaces Up To 1/2” Levels.
Impeller Type Neoprene Rubber over
Impeller Disc Size 2 in 50 mm
Total Head 37 ft 11.3 m
Water Capacity 73 gpm 276 lpm
Max. Solid Intake 0 in 0 mm
Power 1 HP 0.75 kW
Voltage 115 V
Starting Amperage 34.5 A
Running Amperage 6.9 A
Cable Length 25 ft 7.5 m
Dimensions & Weights
Pump Diameter 7.4 in 188 mm
Overall Height 15.4 in 391 mm
Operating Weight 31 lb 14 kg
Mini Gas Pump
Centrifugal pumps deliver liquid at uniform pressure without shocks or pulsations. Having only one easy-to-replace wearing part (a seal), Subaru’s centrifugal construction pumps are easy to maintain, requiring no lubrication, gears, pistons or diaphragms. The simplicity, compactness and economical design make them ideal for a wide variety of general applications. And best of all, every pump is powered by Subaru’s industry leading 4-cycle engine technology, ensuring optimum performance and reliability. Ideally suited for clear water applications, centrifugal pumps can be used for draining pools and ponds, powering sprinklers, providing firefighting support in suburban or rural areas, and dewatering job sites or agricultural locations.
Type Self Priming
Suction/Discharge Size (in) 1
Maximum Capacity (gpm) 28
Maximum Lift Head (feet) 115
Maximum Suction Lift (feet) 20
Maximum PSI (max. head/2.31) 50
Mechanical Seal Material Carbon Ceramic
Engine Model EH025
Engine Type Subaru air-cooled, 4-cycle, OHV gasoline
Horsepower (hp) 1.1
Low Oil System N/A
Run Time (per tank, full load) hrs 1.5
Fuel Tank Capacity (gal) .13
Starting System Recoil
Dimensions (LxWxH) in 13.1 x 8.4 x 12.6
Net Weight (lbs) 12
Vibration Isolators (loose) Standard
Hose Coupling Standard
Hose Band Standard
Garden Hose Adapter Standard
Submersible Trash Pump
Durable trash pump, 1/2HP & 2-inch discharge. Designed to pump sand, solids and debris with minimal wear and clogging.
Built-in shaft mounted agitator suspends solids.
Urethane Semi Vortex Impeller for maximum durability and pump performance.
Dual inside mechanical seal with SiC faces for longer life.
Oil Lifter provides lubrication of the seal faces. (Patented)
V-Ring Seal design protects mechanical seal from abrasive particles.
Motor Output (HP): 1/2
Discharge Bore: 2″
Cable Length: 20 ft.
Dimension (Dia x H): 10-1/16 x 12-15/16″
Continuous Running Water Level: 3.5″
Pump Weight: 30 lbs
Non-submersible Portable Electric Water Transfer Pump
Portable Electric Water Transfer Pump
Lifts water over 35 ft.; removes water down to 1/8 in. of surface with suction attachment (included)
Rugged, metal pump and motor housing
Max. flow is 340 gallons per hour; 300 GPH at 10 ft. of discharge lift
3/4 in. garden hose connections at inlet and discharge
For removing water from aquariums, clogged sinks, flushing water lines
2 Inch Trash Pump
2″ Suction, Trash Pump, 211 GPM, 98 ft. MAX Head; Honda GX160
This Honda-powered trash pump boasts a host of standard features for superior performance across the board. One-man operation to use in various dewatering applications when you have debris in the water.
Lightest trash pump in the Multiquip fleet.
Dual 2-inch discharge ports.
MAX Solid discharge size: 1-inch diameter.
Pumps up to 211 gallons (800 liters) per minute.
Improved mechanical (silicone/silicone) seal.
Reliable 4.8HP Honda GX160 engine.
Low engine oil shutdown.
Aluminum body with cast-iron fittings.
Easy clean-out cover.
Tubular Steel frame for transportation and pump protection.
Cast Iron impeller and volute for abrasion resistance/long life.
Suction x Discharge 2 x 2 in
51 x 51 mm
Max. Water Capacity 211 gpm 800 lpm
Max. Lift 25 ft 7.6 m
Max. Head 98 ft 30 m
Max. Pressure 42.4 psi 292 kPA
Max. Solid Intake 1 in 25 mm
Fuel Tank Capacity 1.03 Gal 3.6 L
Optional Wheel Kit UWKA
Dimensions & Weights
Overall Length 26.9 in 683 mm
Overall Width 18.3 in 465 mm
Overall Height 20.3 in 516 mm
Operating Weight 97 lb 44 kg
2 Inch Suction Hose
This heavy duty suction hose can be used in tough applications with gas engine driven water and trash pumps. This hose is 2 in. Dia x 15 ft. of length. The heavy duty metal fittings are pre-attached at the factory. Basket strainer to keep debris out of the pump is included.
2 in. male hose thread
2 in. female swivel hose thread with rubber gasket
Metal fittings are pre-attached
Connects to any pump or hose fitting with proper hose threads
Submersible Utility Pump
Master Plumber Geyser Series Submersible Utility Pump, .5-HP Motor, 3000-GPH
Master Plumber, Geyser Series, 1/2 HP, Thermoplastic & Stainless Steel, Portable Submersible Utility Pump, 8-Ft. Power Cord, Garden Hose Adapter, Corrosion Resistant Body, Maximum Pumping Capacity To 3,000 Gallons Per Hour, Transfers Unwanted Water From Window Wells, Basements, Rooftops Or Shallow Flooded Area, Easy To Use, Performance: GPH At 0-Ft. = 3000, 5-Ft. = 2500, 10-Ft. = 1900, 15-Ft. = 1320, 20-Ft. = 750
Product Weight (pounds): 10.0
Package dimensions (inches)