3-1/4 Inch x 22 Inch SDS-Max Core Bit
MIN-$25
DAY-$30
24HR-$35
HC8536
3-1/4 In. x 22 In. SDS-max® Rotary Hammer Core Bit
Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.
Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep
Specifications
Attributes
Description N/A
Diameter 3-1/4″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
2 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Patented extra strength tip for longer life
Large flute volume for fast drilling dust transport and less clogging
Narrow flute back for reduced friction between bit and material
Creates true round holes for anchors
Diameter is 2 inches with 16 inches usable length. Total length is 21 inches.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Duraheater
DESCRIPTION
Duraheat, 220,000 btu, kerosene portable forced air heater with dual heat technology, 180,000 btu on low, 220,000 btu on high, commercial grade, heats up to 5,300 sq ft, includes digital diagnostics & led temperature indicator, flat free cold weather tires, built in thermostat, 13 gallon fuel tank, 650 cfm, run time fuel gauge, on/off switch, 1 touch ignition, built in air pressure gauge, auxiliary power outlet, threaded axle system, 1 touch electronic start, extension cord wrap, dual lift handles & convenient drain plug, includes ul listed large capacity motors & fuse protected electrical system, all components are securely fastened into chassis to insure long life, utilizes heavy duty spark technology for in field endurance, multi-fuel capable, has been factory tested to operate with 1k kerosene
220,000 Btu’s
Dual Heat Settings (180 – low / 220 – high) allows set-back of btu output to minimize fuel consumption and
extend operating time
Integral auxiliary power outlet
Large capacity 13 gallon fuel tank
Built-in air pressure gauge
Extension cord wrap
Digital diagnostics and LED temperature indicator
10″ flat-free cold weather tires
Tank drain plug
650 CFM
Operates up to 10 hours on one tankful
SPECIFICATIONS
Product Weight (pounds): 68.3
Package dimensions (inches)
Length: 42.5
Width: 18.1
Height: 20.7
Assembled, or out-of-package, dimensions (inches)
Length: 41.81
Width: 23.11
Height: 26.14
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$35
DAY-$35
24HR-$50
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
2-5/8 Inch x 22 Inch SDS-Max Core Bit
4HR-$25
DAY-$30
24HR-$35
HC8526
2-5/8 In. x 22 In. SDS-max® Rotary Hammer Core Bit
Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power
transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard
bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for
up to 40 percent faster drilling versus previous design.
Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep
Specifications
Attributes
Description N/A
Diameter 2-5/8″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
4×22 Inch SDS-Max Core Bit
MIN-$25
DAY-$30
24HR-$35
HC8555
4 In. x 22 In. SDS-max® Rotary Hammer Core Bit
Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.
Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep
Specifications
Attributes
Description N/A
Diameter 4″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
2×14 Inch SDS-Max Scaling Chisel
MIN-$5
DAY-$10
24HR-$15
HS1917 2 In. x 14 In. Scaling Chisel SDS-max® Hammer Steel
PRODUCT DESCRIPTION
Description
Bosch R-Tec technology for SDS-max® chisels use an energy-diverting reflection element that increases material removal by 15%. Because the energy is dispersed back into the work material, the tool and bit do more of the work with less vibration for the user. The R-Tec chisel features a unique cutting head with extra wedges for increased breakout.
Benefits
For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
Shank 1/2 In.
For use with SDS-max® hammers
Length 14 In.
Specifications
Attributes
Description Scaling chisel, self-sharpening
Flute Length 0.0
Length 14.0″
Quantity 1
Shank Diameter 0.0
Size 2″ x 14″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Dri-Eaz
Product Features
LGR technology boosts effective operating range
Compact size – only 92 pounds
Draws only 5 amps – but removes 70 pints at AHAM
Quick pump access for easy servicing
New, rigid fold-down handle
Improved quick-release hose wrap design
Built-in ring for easy attachment of ducting
If power is interrupted during operation, the unit will automatically restart when power is restored.
(115V models only.)
Product Specifications
Model F292
Type Low Grain Refrigerant
Dimensions (H × W × D) 33.5 × 20.7 × 20.7 in.
Weight 92 lbs. | 42 kg
Water Removal Max (90°F/90% RH) 143 pints | 67.7 liters /day
Water Removal AHAM (80°F/60% RH) 70 pints | 33 liters /day
Operating Range 33° – 100°F
1° – 38°C
Compressor Type 5,595 Rotary
Defrost Type Hot-gas bypass
Process Air 160 CFM
Controls Touchpad
Hour Meter Yes
Condensate Pump Centrifugal
Drain Hose Length 40 foot
Air Filter High Air Flow
Wheels Semi-pneumatic
Handle Steel, fold-down
Housing Rotomolded polyethylene
Power 115 V 5 amps
Cord Length 25 foot
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$70
DAY-$70
24HR-$80
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1-3/8 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Bosch HC5081 1-3/8 In. SDS-max
Product Description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.
Highest drilling speed with inclined side cutters provides fast concrete drilling
Compact head for fast dust removal and longer life
Active-centering tip provides quick, accurate starts
Wear mark indicator assures accuracy of hole diameter
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1.75 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
1 3/4 IN SDS MAX
Product description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT