10×10 Hand Tamper
This True Temper 10″ x 10″ tamper is made for heavy duty construction and industrial work! The 10.6 lb steel tamper head is perfect for tamping asphalt, gravel, stone, and dirt. The flexible ash handle is water resistant for outdoor applications.
MINIMUM RATE FOR THIS ITEM IS 24HR
MIN-$10
DAY-$10
24HR-$10
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Dri-Eaz
Product Features
LGR technology boosts effective operating range
Compact size – only 92 pounds
Draws only 5 amps – but removes 70 pints at AHAM
Quick pump access for easy servicing
New, rigid fold-down handle
Improved quick-release hose wrap design
Built-in ring for easy attachment of ducting
If power is interrupted during operation, the unit will automatically restart when power is restored.
(115V models only.)
Product Specifications
Model F292
Type Low Grain Refrigerant
Dimensions (H × W × D) 33.5 × 20.7 × 20.7 in.
Weight 92 lbs. | 42 kg
Water Removal Max (90°F/90% RH) 143 pints | 67.7 liters /day
Water Removal AHAM (80°F/60% RH) 70 pints | 33 liters /day
Operating Range 33° – 100°F
1° – 38°C
Compressor Type 5,595 Rotary
Defrost Type Hot-gas bypass
Process Air 160 CFM
Controls Touchpad
Hour Meter Yes
Condensate Pump Centrifugal
Drain Hose Length 40 foot
Air Filter High Air Flow
Wheels Semi-pneumatic
Handle Steel, fold-down
Housing Rotomolded polyethylene
Power 115 V 5 amps
Cord Length 25 foot
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$70
DAY-$70
24HR-$80
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
4×22 Inch SDS-Max Core Bit
MIN-$25
DAY-$30
24HR-$35
HC8555
4 In. x 22 In. SDS-max® Rotary Hammer Core Bit
Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.
Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep
Specifications
Attributes
Description N/A
Diameter 4″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Drywall Stilts
Product features
Better fit resulting in smoother action and less wobble
High strength aluminum alloy allows for strong working parts and light weight (6 lbs 4 oz ea.)
Light Weight Aluminum Construction – Offers a one pound weight differential over other stilts
Adjustable from 18″ to 30″ to accommodate most working heights
Product description
If you are in the market for a set of drywall stilts, stop looking! Pentagon tool is an industry leader in drywall
supplies and accessories. They sell more lifts, stilts, and accessories than most other sellers combined. You
are bidding on a set of new premium grade drywall stilts. They are perfect for drywall painting, electrical,
drop ceilings, and many other applications. These are made of premium grade aluminum Alloy and are
backed up. The exclusive Wing bolt design offers flexibility and versatility you can adjust the Height without
tools. In our Opinion, these are the lightest, safest, and most durable set of stilts on the market in this price
range. You will not be disappointed. Features include: better fit resulting in smoother action and less
wobble in our new improved Nylon leg adjustment sleeves. High strength aluminum Alloy allows for strong
working parts and lightweight (6 lbs 4 oz EA.). Lightweight aluminum construction – offers a one pound
weight Differential over other stilts. Adjustable from 18 inch to 30 inch to accommodate most working
heights. 228 lbs load capacity. Dual Spring action allows flexibility and prevents legs from sliding. Premium
grade rubber soles prevent slipping. Adjustable leg bands with pads provide added comfort. Adjustable
heel plates and foot straps – include self-locking metal buckles. Recommended for professionals! new Wing
bolt design enables you to adjust the Height without tools.
4HR-$15
DAY-$20
24HR-$25
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
1×12 Inch SDS-Max Flat Chisel
MIN-$5
DAY-$10
24HR-$15
Bosch HS1911 SDS-max® Hammer Steel 12-in Flat Chisel
For concrete removal and hard surface break-up
Fits Bosch SDS-max hammers
1 In. chisel width and 12 In. long SDS-max shank
One-piece design
Product Description
Bosch offers a full assortment of SDS-max hammer steel points and chisels. This SDS-max flat chisel is highly durable and designed for extreme performance. This product uses an SDS-max shank to ensure tight grip for the toughest jobs.
Item Weight 14.4 ounces
Product Dimensions 12.5 x 1 x 1 inches
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
3×12 Inch SDS-Max Scaling Chisel
MIN-$5
DAY-$10
24HR-$15
HS1910
3 In. x 12 In. Scaling Chisel SDS-max® Hammer Steel
PRODUCT DESCRIPTION
Description
Bosch offers a full assortment of SDS-max® hammer steel points and chisels. Bosch brings constant innovation
to concrete and masonry drilling with increased effeciency and higher durability. All Bosch chisels are
manufactured with a proprietary heat-treat process.
Benefits
Hardened steel bits for use with SDS-max® hammers
For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
Ideal for removing large quantities of material
Wide chisel design for quick and easy chiseling and breaking
Specifications
Attributes
Description Scaling chisel
Length 12.0″
Quantity 1
Size 3″ x 12″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Finishing Nail Gun
Product Information
This Senco ‘FinishPro’ Finishing Nail Gun fires C Series Brads up to 63mm. They are ideal for cabinet making, interior trim, bookshelves, chair rails, crown mouldings & much more. They are well balanced, strong but light which makes them suitable for extended industrial use. They feature an adjustable exhaust, adjustable depth drive plus an ‘EZ Clear’ magazine for clearing nail jams quickly. Complete with a carry case, oil & fitting.
Senco ‘FinishPro’ Finishing Gun
Adjustable Exhaust
EZ-Clear Magazine
Adjustable Depth Of Drive
Fasteners Type – C Series Brads
Range 32mm-63mm
Capacity 120 Brads
Uses 16 gauge nails, 1 1/4 to 2 1/2 length
THE DAY RATE IS THE MINIMUM ON THIS RENTAL ITEM
4HR-$20
DAY-$20
24HR-$30
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Westpointe Dehumidifier
DESCRIPTION
Westpointe, 30 PT, Dehumidifier, Modern White Design, 115V, 3A, 3 Prong Plug,
Approximate Coverage: 500 SQFT, Electronic Control Panel, Low Operating Temperature, With Convenient Bucket Full Indicator Light, New Energy Star Rated, 24 Hour Timer, 250 Hour Filter Wash Remind, Adjustable Thermostat, 2 Speed Fan Control, Auto Shut Off, Continuous Drain Mode With External Drain, 4 Easy Roll Casters, Uses Eco Friendly R410A Refrigerant, 31 LB, Dimensions: 14.17″W x 20.08″H x 10.28″D.
SPECIFICATIONS
Product Weight (pounds): 32.0
Package dimensions (inches)
Length: 15.2
Width: 10.2
Height: 19.7
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$15
DAY-$15
24HR-$20
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Framing Nailer
34° FramePro®701XP
3 1/2″ Paper Taped Framing Nailer
Applications
Framing, Sheathing, Sub-flooring, Crate, Pallet & Truss Assembly
Features
Straight-line 34° magazine for better line of sight.
Simple two-step loading.
Aggressive toenail safety.
Fits easily between studs and joists.
Specifications
Tool Weight: 8 lbs (3.62 kgs)
Height: 13 1/4″ (337 mm)
Length: 15 1/8″ (384 mm)
Width: 4 3/16″ (106 mm)
Technology: Pneumatic
Trigger Type: Sequential Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 10 (SCFM)
Air Inlet NPT: 3/8″
Capacity: 70
Power Type: Pneumatic
Range: 2″ – 3 1/2″
Minimum Rate for this item is the Day Rate
4HR-$35
DAY-$35
24HR-$45
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT