Showing all 6 results

Coil Nailer
Coil Nailer

Features
Innovative firing valve – reduces air consumption without compromise on power or speed
Bi-metal driver blade reduces wear and improves durability
Power in, power out feed system – improves speed and delivers consistent drives

Tool Weight: 5.2 lbs (2.35 kgs)
Height: 10 7/8″ (276 mm)
Length: 10 5/8″ (269 mm)
Width: 4 1/2″ (114 mm)
Technology: Pneumatic
Trigger Type: Contact Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 3.86 (SCFM)
Air Inlet NPT: 1/4″
Capacity: 120
Power Type: Pneumatic
Range: 3/4″ – 1 3/4″

Minimum Rate for this item is the Day Rate

4HR-$20
DAY-$20
24HR-$30

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Compressor 2
Compressor (Large)

Specifications
CFM @ 90 PSI 13.9
Displacement/ Engine 196cc Honda GX200 OHV
Compressor Single stage, cast iron
Tank Size 8-gallon

Weights & Dimensions
Net Weight 175 lbs.
Length 44.5 in.
Width 18.5 in.
Height 27 in.

4HR-$50
DAY-$50
24HR-$60

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Compressor 1
Compressor (Small)

Specifications
CFM @ 90 PSI
4.2 Horsepower/ Motor 2.0 HP, 120V, 15.0A
Compressor Single stage
Cylinder Cast iron
Tank Size 5-gallon

Weights & Dimensions
Net Weight 61 lbs.
Length 20.5 in.
Width 15.5 in.
Height 17.5 in.

4HR-$25
DAY-$25
24HR-$30

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Finishing Nail Gun
Finishing Nail Gun

Product Information
This Senco ‘FinishPro’ Finishing Nail Gun fires C Series Brads up to 63mm. They are ideal for cabinet making, interior trim, bookshelves, chair rails, crown mouldings & much more. They are well balanced, strong but light which makes them suitable for extended industrial use. They feature an adjustable exhaust, adjustable depth drive plus an ‘EZ Clear’ magazine for clearing nail jams quickly. Complete with a carry case, oil & fitting.
Senco ‘FinishPro’ Finishing Gun
Adjustable Exhaust
EZ-Clear Magazine
Adjustable Depth Of Drive
Fasteners Type – C Series Brads
Range 32mm-63mm
Capacity 120 Brads
Uses 16 gauge nails, 1 1/4 to 2 1/2 length

THE DAY RATE IS THE MINIMUM ON THIS RENTAL ITEM

4HR-$20
DAY-$20
24HR-$30

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Flooring Nailer
Flooring Nailer

BOSTITCH MIIIFN

1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
Constructed of aircraft-grade aluminum
Includes rubber-tipped mallet
17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds

Product Description
For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5″; Length: 17.25″; Width: 3.13″;
Weight: 11.2 lbs;
Driving Power: 420 Inch Lbs;
Operating Pressure: 70-90 PSI;
Thread Fitting Type: 3/8″ NPT;
Magazine Capacity: 110 Cleats.
Fastener Specifications: Drives 1-1/2 to 2″ Cleat Nails.

The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and
comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished
hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working.
Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates
that drive staples exactly where you want them.

The Bostitch Pneumatic Flooring Cleat Nailer At a Glance:
420 in./lbs. of driving power
High-speed, mallet-actuated operation
Extra-wide base plate for stability and control
Ergonomic design with elongated handle

1.5″ to 2.0″ L-shaped cleats are ideal for installing hardwood flooring.
Adaptor foot and FloorGuard graphite mallet provide stability and control.
Interchangeable base plates help you drive cleats at the proper angle and depth.

All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your flooring jobs quickly and easily. Just connect the
Bostitch MIIIFN Pneumatic Flooring Cleat Nailer to your air compressor for 420 in/lbs of impact at 70-120 PSI.
A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 110-cleat
magazine will keep you working without interruption.

Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFN features an elongated handle that lets you work in a
natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit
flush against floor boards for stability, so you can drive cleats at the proper angle and depth every time.
Additionally, a pre-finished floorboard adapter foot won’t scuff or scratch floors during installation for a
professional-grade look.

Lightweight, Durable Construction for Everyday Use
The MIIIFN Pneumatic Flooring Cleat Nailer’s lightweight body and graphite FloorGuard mallet make this tool
comfortable enough to wield all day without fatigue. Built for durability, this nailer will withstand the wear
and tear of any jobsite.

The Bostitch MIIFN Pneumatic Flooring Cleat Nailer measures 3.13 x 11.5 x 17.25 inches (WxHxL) and weighs
11.2 pounds.

Refer to your flooring recommendations for fastening tool

MINIMUM RATE FOR THIS ITEM IS DAY RATE

MIN-$45
DAY-$45
24HR-$50

FOR EXTENDED PEROID RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Framing Nailer
Framing Nailer

34° FramePro®701XP
3 1/2″ Paper Taped Framing Nailer
Applications
Framing, Sheathing, Sub-flooring, Crate, Pallet & Truss Assembly
Features
Straight-line 34┬░ magazine for better line of sight.
Simple two-step loading.
Aggressive toenail safety.
Fits easily between studs and joists.

Specifications
Tool Weight: 8 lbs (3.62 kgs)
Height: 13 1/4″ (337 mm)
Length: 15 1/8″ (384 mm)
Width: 4 3/16″ (106 mm)
Technology: Pneumatic
Trigger Type: Sequential Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 10 (SCFM)
Air Inlet NPT: 3/8″
Capacity: 70
Power Type: Pneumatic
Range: 2″ – 3 1/2″

Minimum Rate for this item is the Day Rate

4HR-$35
DAY-$35
24HR-$45

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more